<=====================================8<=====================================>
Posted By: pet (PETa to jsem ja :-)) on 'Koudink'
Date: Wed 25.7.2001 10:45.22
Title: Re: harddisk
A dela ti to jen ve windowsech a v jinych systemech ne?
No prave ze jen ve winech. V linuxu to je ok a - no nevim zda je to sysstem,
ale reknemez ze ano - ve winME je to tez ok
Jak stary mas napajeci kable k disku? Me se taky zdali v poradku ale po
prepajeni to bylo o moc lepsi. Jinak bych zacal uvazovat o novem disku..
No myslis ze by to zacalo delat po pulroce provozu kdyby to byla elektrika - i
kdyz je fakt ze ted je tady v recku nejaky divny obdobi se spoustou
pochybnych podpeti a vypadku... ze by prazdniny v elektrarne?
PETa to jsem ja :-)) \|/
Covex
PETa to jsem ja :-)) \|/
.~~~~~.
,~,~. |
|o|o| ;
________`-'-'_/__________
____|_____|_____|_____|_____
<=====================================8<=====================================>
Posted By: pet (PETa to jsem ja :-)) on 'Koudink'
Date: Wed 25.7.2001 10:47.45
Title: Re: harddisk
Este me k tomu disku napadla jedna vec, sice vubec netusim zda je to mozne,
ale jiz nekolikero lidi hlasilo ponekud zarazejici chovani W2k k diskum pri
ruznych hodnotach ATA onech disku...
Covex
Jo to zni zajimave... No podivam se na to - fakt me ale zarazi ze to zacalo
delat az ted a zas na druhou stranu dnes to vse vypada ok - mozna fakt jen ta
elektrika - jsou to strasny kanci - domov sladky domov
PETa to jsem ja :-)) \|/
.~~~~~.
,~,~. |
|o|o| ;
________`-'-'_/__________
____|_____|_____|_____|_____
<=====================================8<=====================================>
Posted By: Alfi (proc se nemusim nic ucit?) on 'Koudink'
Date: Wed 25.7.2001 16:54.16
Title: Re: harddisk
Jinak pokud to mas Seagate (ja to mel taky 2x Seagate a novy je IBM), tak ty
udajne dokazou poslat hdd do suspend modu i pri praci (dle man hdparm). Tak
zksu v biosu vypnout vypinani disku a apod.
nepatri to sice k tematu, ale dovolim si to doplnit :-)
dneska uz vsechny disky (podle moji zkusenosti vsechny, ktere jsou pres 40 ci
80 M) se daji nastavit na vypinani po urcite dobe necinnosti :) tedy ne jen
seagaty.. :) bud to umi primo bios prostrednictim APM, ci se na to da napsat
par instrukci v assembleru :)
No asi jsem moc nepomohl...
ja asi vubec ne, co? ;)
PeS the Elven Mage
Alfi
Na svete pouziva Windows zhruba 200 milionu uzivatelu...
To znamena, ze celych 5 miliard lidi si svuj operacni system jeste nevybralo :)
<=====================================8<=====================================>
Posted By: pet (PETa to jsem ja :-)) on 'Koudink'
Date: Wed 25.7.2001 21:38.22
Title: Re: harddisk
No asi jsem moc nepomohl...
ja asi vubec ne, co? ;)
No tak skutecne jsi ani trochu nepomoh :-)
Asi to skutecne bylo tou elektrikou protoze dneska ani jednou netuknul a to
jsem jeste s windowsama nic nedelal (teda akorat jsem vypnul start ftp
serveru - ale tomu se mi moc nechce verit - no zitra jej zas zkusim zapnout a
uvidime)
PeS the Elven Mage
Alfi
PETa to jsem ja :-)) \|/
.~~~~~.
,~,~. |
|o|o| ;
________`-'-'_/__________
____|_____|_____|_____|_____
<=====================================8<=====================================>
Posted By: Covex (..na Rynu.. na kuri nozce) on 'Koudink'
Date: Thu 26.7.2001 9:27.57
Title: Pro unavene oci.. emacspeak
Pokud nekoho, stejne jako me, obcas uz boli oci od koukani do monitoru, a
presto jeste musi neco udelat, pritom si ovsem vystaci s linuxem a textovou
konzoli, resp. nevadi mu emacs (mimochodem emcas neni spatny editor/ne jen
editor, ale prijde mi zatim obludne velky), nize mate navod, jak svuj linux
obohatit o, rekl bych velmi zdarili, zvukovy recovy vystup pomoci emacspeaku
a IBM ViaVoice Text-To-Speech. Jedna se o anglicke "howto", kterezeto jsem
sepsal pro sebe a pro pripadne zajemce:
Pokud vas moznost text-to-speech vystupu emacsu a konzole nezajima, muzete
tento post s klidem preskocit.
-------------------begin----------------------
INSTALATION of EMACSPEAK and IBM ViaVoice procedure.
This file contains description of how my installation was done.
I wrote this howto for my future instalations and also because I was unsure
of a lot of things during instalation (for example: Which files I need from
IBM?) and I hope to save lot of time to other people.
I am using almost unmodified Red Hat 7.0 CZ (Czech) Workstation instalation.
Files for emacs that I expect that are related to emacspeak and that
I had instaled:
emacs-cs-utils-4.3-2,
emacs-20.7-17,
emacs-leim-20.7-17,
emacs-X11-20.7-17,
emacs-nox-20.7-17
-
Packages you need:
-
From IBM site: (http://www-4.ibm.com/software/speech/dev/index.html)
(You need to fill the registration there.)
viavoice_tts_rtk_5.tar - contains readme and rpm instalation for
Text-To-Speech (TTS) Run Time Kit (rtk) for Linux!
viavoice_tts_sdk_5.tar - contains readme and rpm instalation for
Text-To-Speech Software Development Kit for Linux! This file contains
Outloud.
-
emacspeak-14.0-1.noarch.rpm,
(these files are also in emacspeak dowload dir):
stdiom.README,
stdiom.tar.gz
-
Not necessary is:
ftp://ftp.hungry.com/pub/hungry/lesstif/bindist/lesstif-0.91.0-1.i386.rpm
-
1.step - Instalation of ViaVoice.
rpm -ivh ViaVoice* , I've got dependenci error that libXm can not be found.
(This is probably for lesstif frontend for Outloud which I do not need.) so
I did instalation with --nodeps. Then instalation was without problems. And
after check with 'runcmdlinespeakfile' (which is very nice!) in
/usr/lib/ViaVoiceTTS/samples/cmdlinespeak, speech seems to be ready.
2.step - Instalation of emacspeak.
rpm -ivh emacspeak*, without problem.
After instalation there is a short message what to do to run emacspeak with
Outloud. There in 2) is mentioned that you have to change to emacspeak dir
/usr/share/emacs/site-lisp/emacspeak/servers/linux-outloud and run 'make' to
compile Outloud support. There is not mentioned that you need also to do
'make install' and relogin. (It is mentioned in emacspeak NOTE.)
In 3) there is written that you need to obtain and install
http://www.leb.net/pub/blinux/emacspeak/blinux/stdiom.tar.gz for some
feature of Outloud to work. Accidentaly there is not written what to do with
this package to install, and README inside package is very poor and almost
useless. What I found, this package contains precompiled version of
stdiosynth (you are not able to compile it without Open Source Sound (OSS)
driver so rather don't do make there), and if you what stdiosynth to work it
is necessary to copy stdiosynth into /usr/bin directory. Newertheless
Outloud after checking with
'tcl /usr/share/emacs/site-lisp/emacspeak/servers/outloud' still gives error
that
can not initialize "notes". You can get rid of this by commenting line 282
in /usr/share/emacs/site-lisp/emacspeak/server/outlout file, but what I found
it is not necessary to do that to run emacspeak.
In stdiom.README, there is mentioned that you need some package from
http://www.4Front-Tech.com/. I do not know what is there but I expect that
it is OSS driver, for compilation and therefore you don't need it. I was
not able to run command midi_tk | stdiosynth, which is mentioned in this
README because I do not have midi_tk, so I did not do that.
-
That was instalation of emacspeak. After testing with
'tcl /usr/share/emacs/site-lisp/emacspeak/servers/outloud'
I still got error that EMACSPEAK_DIR is not set to right dir.
I've added export EMACSPEAK_DIR="/usr/share/emacs/site-lisp/emacspeak/" into
my .bash-profile and relogin.
Then after running emacspeak with -o option, it succesfully started with
Outloud output.
At it is all. What remains is to learn how to work with emacs, I've never
used it.
Also I do not guarantee that everything what is written here is fine, but
emacspeak seems to work after all.
---------------end------------------
Covex
<=====================================8<=====================================>
Posted By: PeS (. o O (....?)) on 'Koudink'
Date: Thu 26.7.2001 10:18.54
Title: Re: harddisk
Jinak pokud to mas Seagate (ja to mel taky 2x Seagate a novy je IBM), tak
ty
udajne dokazou poslat hdd do suspend modu i pri praci (dle man hdparm).
Tak
zksu v biosu vypnout vypinani disku a apod.
nepatri to sice k tematu, ale dovolim si to doplnit :-)
dneska uz vsechny disky (podle moji zkusenosti vsechny, ktere jsou pres 40
ci
80 M) se daji nastavit na vypinani po urcite dobe necinnosti :) tedy ne jen
seagaty.. :) bud to umi primo bios prostrednictim APM, ci se na to da napsat
par instrukci v assembleru :)
Ja vim, ze to umi i ostatni, problem ale u tech Seagatu je ten, ze oni jsou
schopny se vypnout i pri cteni/zapisu...:
-Z Disable the automatic power-saving function of certain
Seagate drives (ST3xxx models?), to prevent them from
idling/spinning-down at inconvenient times.
To je z man hdparm...
PeS the Elven Mage
Alfi
PeS the Elven Mage
Student of Unseen University
<=====================================8<=====================================>
Posted By: Alfi (proc se nemusim nic ucit?) on 'Koudink'
Date: Thu 26.7.2001 17:13.07
Title: Re: harddisk
Ja vim, ze to umi i ostatni, problem ale u tech Seagatu je ten, ze oni jsou
schopny se vypnout i pri cteni/zapisu...:
-Z Disable the automatic power-saving function of certain
Seagate drives (ST3xxx models?), to prevent them from
idling/spinning-down at inconvenient times.
To je z man hdparm...
jezis, to je ale prisernost.. :-)
PeS the Elven Mage
Alfi
Na svete pouziva Windows zhruba 200 milionu uzivatelu...
To znamena, ze celych 5 miliard lidi si svuj operacni system jeste nevybralo :)
<=====================================8<=====================================>
Posted By: Tuttle (snazimsepsatalesponsikmo) on 'Koudink'
Date: Tue 31.7.2001 19:32.02
Title: Kylix
[ repostuji - predtim jsem to spatne formuloval ]
Borland uvolnil svuj balik pro vyvoj aplikaci na Linuxu Kylix do obecneho
pouzivani. Stahl jsem si to a dela to na me dojem prevedeni Delphi do Linuxu.
Ja to asi pouzivat nebudu, ale nekoho z vas by to mozna mohlo zajimat.
Stahovani z Borlandich stranek a registrovani je na dlouho a tak nabizim ke
stazeni ode me vc. registracniho klice a serioveho cisla.
Staci rict, hezky den,
A to je o krevetach asi vsechno...
Tuttle
|
